FC3 Dual/Triple Pump Staged Controller

FUSE SELECTION
20A - Recommended for pumps GSS341 / 342 / 340
25A - Recommended for pumps F90000262 / 267 / 274 / 352
30A - Recommended for pumps F90000285 / 295

Two stage electrical solution for dual or triple pump return fuel systems for efficient load handling and power distribution
Simple trigger system works with basic switched 12V+ on/off (6.5V+ minimum)
Run 1,2, or 3 pumps full time, with remaining pumps activated on demand (requires external switch, i.e. Hobbs, RPM, etc)
30 amp x 3 capacity, 99.3% efficient
Replaceable internal fuses for each pump
May also be used on other DC motors such as intercooler, water (check current requirements)
NEW High Current APP® connectors pre-installed on main power/ground for maximum connection integrity and reliability

AVAILABLE CONFIGURATIONS

Basic: comes with unassembled APP® connector for main power and ground
Add Main Power and Ground Harness: 15' 4 AWG power, 3' 4 AWG ground assembled to APP® power connector with 100A inline fuse.
Add Pump Pigtails: three pairs of interchangeable 7' 12 AWG pump wires assembled to Delphi pump connectors and unassembled male Delphi connectors

WARNINGS

Do not operate with over 16.5V supplied power
For interior installation only
Run only one pump per output (three maximum)

ACCESSORIES
Honeywell Pressure Switch
Replacement 4 AWG APP® main power connector, unassembled

HOW TO DEPIN A WEATHERPACK CONNECTOR